Tobee F6147R26 Rubber Impeller for 8x6 inch centrifugal slurry pump

Rubber Impeller Spare Parts F6147R26 on 8x6 inch centrifugal Tailing pumps.

Tobee Rubber Slurry Pump Spare Parts are mainly pump wetted parts and directly contact with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liners, throatbush, frame plate liner insert, casing etc. The rubber slurry pump parts are more suitable for delivering strong corrosive or abrasive slurries of small particle size without sharp edges.

Tobee Rubber Slurry Pump Main parts:

• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.

• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.

• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.