24/05/2023 Hardware Supplies
3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, the high head slurry pump lines can often satisfy application duties with a single pump where others require multiple pumps in series.
SPECIFICATIONS:
Size: 3" x 2"
Capacity: 68.4-136.8m3/h
Head: 25-87m
Speed: 850-1400rpm
NPSHr: 3-7.5m
Eff.: 47%
Power: Max. 60kw
Handling solids: 31mm
Materials: A05, A07, A12, A49, A51, A61 etc
Tobee® 3/2 D HH High Head Slurry Pump Design Features:
• High head, high pressure centrifugal end suction slurry pump design.
• Ductile iron fully lined casing provides durability, strength and long service life.
• Hyper wear resistance materials for longtime worklife.
• Multi-stage high pressure operation allowed.
• Heavy duty construction with through-bolt design provides ease of maintenance and results in less down time
• Large diameter, slow turning, high efficiency impellers result in maximum wear life and lower operating costs
• Large, open internal passages maximize wear life and lower operating costs
• Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Tobee® HH High Head Slurry Pumps Applications:
3x2D HH Centrifugal Mining Pumps with CV Drive Arrangement
HH high head slurry pumps widely used for wet crushers, SAG mill discharge, ball mill discharge, rod mill discharge, Ni acid slurry, coarse sand, coarse tailings, phosphate matrix, minerals concentrate, heavy media, dredging, bottom/fly ash, lime grinding, oil sands, mineral sands, fine tailings, phosphoric acid, coal, flotation, sugar beets, process chemical, pulp and paper, FGD, waste water etc.
Contact Information:
HEBEI TOBEE PUMP CO.,LIMITED
Add: Hi-tech Development Zone | Shijiazhuang City 050000 | Hebei Province | China.
Email: Sales9@tobeepump.com | Mob: +86-18132079120 | Fax: +86 311-87221317 | Skype: Sales9@tobeepump.com
Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.cc | www.hydroman.cn | www.tobee.store
3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, the high...
Tobee® L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designe...
Tobee® M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone...
8x6E-AH Slurry Pump is used for highly abrasive/density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage a...
More Details