PCB Fabrication

19/11/2022 Computers - Hardware

Price: Check with seller

Description

The PCB board has copper traces but no circuit components at this stage of the PCB fabrication process. At the locations where the electrical and electronic components are positioned on the board, holes must be bored to mount the components. Either lasers or a unique Tungsten Carbide drill bit is used to create the holes. The electrical connection between the layers of the board is made when the holes are drilled and either hollow rivets are placed into them or they are electroplated. The PCB is then covered in a masking material, except for the pads and the holes.

Contact More Info:-

High Quality PCB Co., Limited

Office: Shajing Town, Baoan District, Shenzhen, Guangdong 518000, China

TEL: +86-755-23724206

Skype: shawnwang2006

Email: [email protected]

https://www.efpcb.com/

More Details

Total Views:41
Reference Id:#2028664
Phone Number:+86-755-23724206

Comments

Copyright © 2008 - 2024 |   All Rights Reserved |   tuffclassified.com |   24x7 support |   Email us : info[at]tuffclassified.com