External Gear Pumps Suppliers

Gs Hydraulic is the best External Gear Pumps Suppliers. Gear pumps that are mounted on the outside are a cheaper and more space-efficient alternative to gear and piston pumps. The pump has a housing, an outside gear, a shaft that turns, and a shaft that stays still. The teeth on the moving shaft line up with the teeth on the outside gear. The stationary shaft moves because the rotating shaft turns with the outside gear. The port for letting fluid into the pump is at the bottom and is connected to the shaft that stays in one place. The fluid comes out of the pump through the port at the top of the pump. A gear pump that is mounted outside of the tank or reservoir is said to be "externally mounted." It is not often used to move fluids that are thick or have a high viscosity. External gear pumps can be used for a wide range of tasks, such as pumping water and washing cars. The chrome finish on the pump makes it resistant to rust and corrosion, so it will last for a long time. The pump can be used with a garden hose or a bucket because it can handle water. On the side of the round pump head, there are two half-circle slots. It is made of cast iron and is 3.5 inches across on the inside and 4.25 inches across on the outside. Both the pump's inlet and outlet pipes are 3 inches long and have a 1.5-inch diameter at their widest point. The pump head screws into the pipe that goes out of the pump. The pipe that goes into the pump head is threaded and screws in. Two half-circle slots are cut into the side of the pump head, which is made of cast iron and is round. Gs Hydraulic is the best External Gear Pumps Dealers.