Best MB Epoxy Table Top Resin Kit

MB EPOXY TABLE TOP RESIN KIT (For 8 mm to 9 mm casting)

HIGHLIGHTED FEATURES:
· Crystal Clear
· Super High Gloss
· Mixing Ratio 3:1
· Very strong
· Self Levelling
· 100% Solid, No VOCs
· Great Air release
· Suitable for all kinds of casting up to 10-15 mm
· Slow cure (24 hours @ room temp.)
· Heat resistant

PACKAGE INCLUDES:
1 kg (Resin 750 grams + Hardener 250 grams)
4 Pigments 25 grams each (Ocean theme)
· MB AQUA MARINE
· MB NAVY BLUE
· MB WHITE
· MB IVORY (All the pigments are opaque)

DESCRIPTION:
MB Table Top Epoxy Resin is specially formulated to give a high gloss in clear casting and leaves a glass-like finish. This product provides a slow cure and property development at ambient and low temperatures without accelerators and allows for a quick return to service.

Approved Applications:
o Wood
o Casting
o Coffee table
o Counter tables
o Coaster
o Tabletops
o Craft coatings
o Jewellery making (small casting or multi-layered)
o Hobbyist and craft making
o Plaques and frames
o Pebble coating


TECHNICAL DETAILS:
DETAIL
TIME
TEMPERATURE
POT LIFE
60 mins
@25-30 deg C
WORK TIME(POST POUR)
120 mins
@25-30 deg C
TOUCH DRY
10-12 hrs
@25-30 deg C
FULL CURE
24 hrs
@25-30 deg C



NOTE: The typical pot-life on this item is roughly 45-60 minutes based on mass and temperature.
The full cure is 24 hours in normal conditions.



MEASURE:
· Wearing your gloves on, Pour the desired amount of Part A into a measuring container.
· Pour Part B into the Part A container until it’s at the right mark to make it a 3:1 ratio.
· You can refer to our resin coverage calculator to determine how much you'll need
· https://www.mbenterprises.co/calculator
· PRO TIP - Mix up a little more than you think you’ll need because you want to completely cover your work in one shot and not have to mix more later.

MIX:
· Mix for at least 10-12 minutes in a round motion until the chemical is clear and free of striations
· Allow the mixed components to stand in your mixed cup for at least 2-5 minutes.

POUR:
· Pour along the side of the container to help alleviate air entrapment. This allows for bubbles to rise to the surface.
· Small castings and potting units may take longer to cure than larger items.

WAIT:
· MB EPOXY TABLE TOP RESIN needs to sit for several hours in a dust-free space while it cures.
· In about 10-12 hours it will be touch dry.
· It will be fully cured within 24 hours.

NOTE: Cold weather slows the curing process down, whereas heat speeds curing up


Visit us at - https://www.mbenterprises.co/mb-epoxy-table-top-resin-kit