Power Control Center (PCC) Panels

Main LT Panel / PCC Panel with single / multiple Incomers, Bus coupler with Electrical and/or mechanical interlocking are provided.

Protective Relays, Indication lamp, Meters are to be provided whichever required.

PCC Panel are offered with various Design like Top / Middle / Horizontal Bus bar chambers, Panel with Aluminum or Copper Bus bar, Top / Bottom / Front / Rear cable Termination

Combination of APFC part with the Panel.

Facilities like DG Incomer with AMF function, Cut-off of the non-essential feeder at the event of Mains supply.

PCC Panel with provision to connect bus duct at main Incomer side.

Technical Features
Construction Details
Modular / Non- compartmentalized construction.
Panel structure with MS CRCA/SS.
Indoor / Outdoor type Structure.
Single front/double front Operated.
Provision for Extensible for future use.
Provision of Rubber Gaskets to meet IP requirement like IP-42/52/54/55/65.
Provision of Rubber Gaskets to meet IP requirement like IP-42/52/54/55/65.
Arrangement for heat dissipation by means of Exhaust Fan or Lowers.
Pre Treatment And Painting
Three Tank / Seven Tank Pre treatment process
Final paint shade as per IS or client specifications
Synthetic Enamel / Epoxy based primer / Powder coating as per customer’s requirement
Bus Bar Arrangement & Cable Alley
Electrical Grade Aluminum / Copper Busbar
Main busbar chamber at top / bottom of the Panel
Separate chamber for vertical dropper
Busbar System design on basis of continuous Current rating and Fault level with stand capacity
Allowable temperature rise as per IS 8623 or as per specifications
Busbar supports of SMC/DMC Material
Top / Bottom cable entry. Detachable gland plate for cable entry
Assembly & Wiring
Selection of components from Approved / Reputed vendor list as per Approved Drawing
Design of Internal Layout fo optimum usage of space
Internal wiring with 660/1100 v Grade PVC coated stranded Copper Flexible Wires
Crimping Lugs are used for intrnal Connections / Terminations
Quality Assurance & Control Systems
Inspection of Fabrication structure for dimension as per approved G.A. drawing
Inspection of Painting / Powder coating