People these days are all about going on adventures and exploring different trekking route. But what is most important in these expeditions are to buy the products from reputed tent manufacturers. Improper tents can lead to many dangers. So it is mandatory for these tents to have some standard quality measures, such as:
- Tent needs to be waterproof. Most tent supplier tends to sell their material solely on the basis of water resistant quality, but you need to keep in mind more details while purchasing them. There are of course different measurements to be considered while measuring the waterproof quality of a tent, but always go for the tropics flysheet. They are usually the best. It has water resistance of about 3000 mm. Again the water resistance does not solely depend on the quality of the flysheet, but also on the fact that the seams are properly taped with fully thermo adhesive tapes. So while going to purchase a tent, make sure to check out every corner of the seam.
- Protect your flysheet from UV radiations. Tents manufactured 30 to 40 years ago were more durable than tents manufactured now. They were usually 3 to 4 times more bulky and heat resistant than what they are now. These days, the lightweight polyester flysheets come with their own disadvantages. One of the biggest of them is that they tend to discolor and wear off in direct sunlight especially as you climb altitudes. So the best solution is to purchase tents which are rather bulky. However this is not always possible, especially if you are camping for a long time. In such cases, remember to set your tent in shady places or the west face of a mountain for longer lifespan.
- Always use polythene for the floor. When an enthusiastic camper goes to buy a tent, he or she always opts for a lighter one. A lighter tent would most definitely prompt the retailer to sell you nylon sheets for floors. Never purchase that. Nylon floors are never fully water resistant or mechanically strong, always prompting the request of additional support and protection. This will in turn weigh your backpack more than just getting a tent with polythene for floors. Always opt for the high density polythene that is laminated on both sides. This allows the fabric to be highly water resistant and tear resistant, especially on stony grounds, which is usually the case in mountain regions.
- Aluminum poles have a tendency to break. Although aluminum alloys are quite strong and flexible, it doesn’t render it unbreakable. The main reason they tend to fall apart is because either there is a mechanical damage somewhere or because they are tilted to one side due to the tendency of operation. Hence, it is highly recommended to look for stock repair tubes for the poles or the handy repair kits for those shocking times. These are usually produced by some reputed tent manufacturers only.
Give above are some features that you may want to keep in mind to help you buy quality products from reliable tent manufacturers only to make your next adventure really enjoyable.