the products will be crushed and ground

No image available

Sponsored Ads

Price: Check with seller

The highest anti-pressure strength of the crushed material is 320MPa. Motor drives belt and belt pulley to help make the...

  • Category: Construction Machine
  • Published: 10/07/2014
  • Current Rating: /5 0 Vote

    Description

    The highest anti-pressure strength of the crushed material is 320MPa. Motor drives belt and belt pulley to help make the movable jaw up and down through eccentric shaft. When the movable jaw is up, the angle between lining plate and moving jaw becomes large, and this will push movable jaw plate to get close to the fixed jaw plate.


    Throughout this procedure, the products will be crushed and ground, thus the crushing procedure will be done. When the movable jaw is down, the angle between lining plate and moving jaw becomes small, the movable jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed components will be discharged with the lower opening of the crushing room. Together with the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass creation can be realized.


    However, because of the unique features of the uncooked products, there may be various forces through the crushing process. The point is, the stronger the force is, the much better crushing result comes. For instance, Zenith deep chamber jaw crusher lengthens the crushing distance, which can make the components completely crushed.


    jaw crusher:http://www.crusherdata.com/jaw-crusher.html


    Phone Number : 150 3802 1592

    Related Ads

    Leave your comment


    Copyright © 2016 |   All Rights Reserved |   tuffclassified.com |   24x7 support |   Email us: query[at]tuffclassified.com