15/07/2015 Housing Swap
Sand making machine we usually in the construction site has been seen, but there are not many people can contact, nor a comprehensive understanding of the. Now a brief introduction to the structure of the sand making machine parts. Sand making machine consists of a feed hopper, distributor, crushing cavity, bearing, impeller, a base, a driving device and motor several parts. In this part of the various parts to do a simple introduction.
Feed hopper and distributor of the two see understand, crushing chamber is crushed into the raw materials and the function of temporary stay materials. Next to the impeller part of the sand making machine, the impeller is the key part of the crusher, the main material evenly distributed to each of the left way. The crushing chamber, the main shaft, and the motor drive are mounted on the base.
After a brief introduction of the main components and functions of the sand making machine. Understand that it's better to say it's working principle. Material enters from the feed inlet by sub feeder is divided into two parts, part of the into the impeller, impeller rotate quickly and to the acceleration of material, so that the material from the three channel impeller out. After a series of impact crusher run out of the discharge port. In the process of the mutual impact of these materials is not with the original machine but with the occurrence of the lining. This avoids the wear of the machine.
Know the work will be the principle of sand making machine, a good sand making machine must withstand the wear. So now it's research and transformation of the machine. The traditional domestic impact block is composed of steel and alloy casting, greatly improves the wear resistance. Believe that with the development of science and technology, there will be better materials were found to be applied, so that there will be better sand making machine.
sand making machine: http://www.perfectcrusher.com/product/crushing/vsi-sand-making-machine.html