Category : Other Services Posted : 25/08/2014 Price : Check with seller
Sand making machine is an important equipment of sand production line, the equipment, good or bad, work efficiency directly affect the sand yield and quality, VSI sand making machine in the use process in the long-term wind and rain, sand making machine equipment surface will appear rust, wear, etc., but not handled in a timely manner will influence system sand machine production efficiency, even cause serious wear of equipment, shorten the service life and the following is in the long-term production practice summed up the effective method to remove the sand making machine corrosion on the surface of, for reference.
1, apply anti oxidation paint: in iron products surface coated with mineral oil, paint or enamel firing, spray etc.. In the iron and steel surface with electroplating, hot plating and other methods on a layer of metal, such as zinc, tin, chromium, nickel, etc.. These metals can form a layer of dense oxide film, so as to prevent iron products and water, air and other physical contact and rust. It can also be used to produce a compact and stable oxide film on the surface of the iron products to prevent the iron from rust.
2, chemical derusting: chemical reaction with acid and metal oxide, so as to get rid of sand making machine, metal surface corrosion products, which is often referred to as the pickling, this method is only suitable for operation in the workshop.
3, high-pressure water abrasive cleaning by high pressure water jet impact and water lever effect and corrosion coating of steel adhesion failure. This method, no dust pollution, no damage to steel, greatly improve the efficiency and quality of good rust, rust. But after rust removal of steel easy return to rust, to be wet with a special coating rust coating, performance coatings in general have a greater impact on coating.
4, the small-scale wind-driven or electric rust: electric or compressed air as a driving force, assembly suitable derusting device, reciprocating or rotary motion, in order to meet the requirements of various occasions of rust, such as angle pneumatic needle beam rust remover, the wind knocked chipping hammer, tooth type rotary descaling device, to polishing machine, steel wire brush, which belongs to the semi mechanized equipment, light weight, flexibility, can thoroughly remove rust, the old coating, the coating play hair treatment, but can not reach the quality of surface processing quality and efficiency than injection for treatment of low.
sand maker: http://www.perfectcrusher.com/product/crushing/vsi-sand-making-machine.html