02/03/2020 Hardware Supplies
If the door sweep is installed too tightly how to fix, there are usually three reasons:
1. The size of the base of the door sweep is too large, it is already tight when installed, but the door sweep is still installed in the holder.
2.The holder size is too small, and the door sweep is suitable, then it will cause too tight installation.
3. The size of the base of the door sweep is appropriate, but the filament thickness of the replacement door sweep is thicker, which causes the filament to become stuck and then cannot be pulled out too tightly after installation.
Door sweep is installed too tightly how to fix, in order to solve the above 3 problems, you generally need to choose a matching door sweep and plastic or aluminum holder. When installing, there is a little trick. Polish the holder, especially the aluminum holder first, and then insert the door sweep to the polished side of the holder, and the installation is relatively smooth.
Door sweep is installed too tightly how to fix, Aoqun can tell you how to figure it out.
Aoqun, a large professional brush company integrating R & D, production, sales and service; adhering to the tenet of “Sincerity and Commitment to achieve the future”, with the professionalism of “professional, concentrated and dedicated”, we will do our best to make every brush, to building an excellent national brand and contributing more power to “China’s intelligent manufacturing”.
We all know that there is an essential gap between the door leaf and the ground, which guarantees the free opening and closing of the door leaf. But w...
It is well known that because of the gap between the door body and the wall, floor, or metal parts, it is necessary to install seals to seal these gap...
Aoqun’s brush door sweeps for sliding barn doors business orders are increasing. So what are the advantages of Aoqun’s brush door sweeps for sliding b...