30/04/2020 Hardware Supplies
The basic version of this system consists of a gas cooler with condensate pump and a filter. A gas pump, moisture detector, flow meter or temperature controller are optional.
The sample gas cooler cools the sample gas to the preset dew point (factory preset +5 °C / 41 °F) regardless of the ambient temperature. The safety circuit only activates the sample gas pump once the cooler has reached its operating point.
The sample gas cooler in the PCS.smart+ features a new generation heat exchangers with a particularly low wash out effect of water-soluble components and are specifically suitable for measuring emissions. The PCS.smart+ can therefore be used for measurements to EN 15267-4.
Brix Engineering Pte Ltd.
Address: 190, Middle Road, #16-01, Fortune Centre, Singapore - 188979
Phone No: +65 9446 2236
The back-pressure sensor VSA 24 is a pressure switched controlled by microprocessors with two switching outputs for advance warning (filter contaminat...
The basic requirements for any Air Conditioning Unit is to perform according to given parameter with trouble free operations. These are mainly remote ...