05/08/2014 Industrial Equipment
Ring hammer crusher is for a variety of brittle materials such as coal, coal gangue, slag, shale, limestone and so on. The maximum compressive strength of the material to be broken is no more than 12MPa and the surface water is less than 9%. Ring hammer crusher consists of rotor, the main part of the body, regulating agencies and other components.
The main part of the crusher consists of rotor shaft parts, the end portion of the disk, the cartridge hammer, the hammer shaft and other components. Ring hammer hangs in the shaft hammer and hammer shaft is mounted on the end of the disc and hammer chuck, chuck ends with a flat disc and keys and a round nut on the spindle.
Ring hammer crusher is a kind of impact crusher with a ring hammer. Ring Hammer can not only turn with the rotor, but also around the hammer shaft rotation. After the material enter the crushing chamber, they are broken first by the high-speed ring hammer and the materials get the
kinetic energy and rushed on to the crushing plate for the second broken. Then the materials fall onto the sieve plate, after extrusion it will be discharged through the sieve pore. Material not broken will enter the metal collector, and later removed regularly.
Ring hammer crusher discharge size adjustment is achieved by changing different sieve pore strips or sieve to achieve and general sieve or sieve of the particle size of 30mm.If choosing other kinds of material particle size, when required to provide special orders. Whether you need the factory to configure the funnel, please specify when ordering.
With the continuous introduction and application of home and abroad crushing technology, production technology of heavy hammer crusher, jaw ...